Q: I'm loading a memory card with cwcheat. it says the operation went fine but
   still i can't see my saves when i go to load the game. what i'm doing wrong?

A: this depends on the game which has already loaded an image of the memory cards
   before you loaded your memory cards.
   As it isn't possible right now to simulate a "memory card eject" the solution for this
   is loading the memory cards as early as possible (for game whith the piracy harms... screen
   it's fine there) else keep select pressed while loading the game and when the cwcheat menu
   appears load your memory card

Q: I've added some cheats to the db they are in the right format as explained by the
   HOW TO USE THE MEMORY CARD SUPPORT.txt file in the cwcheat archive but still i can't
   get my codes to show in the select cheats screen. what's wrong?

A: the most frequent reason to this is that you are entering the ID with a different case
   as the one shown by cwcheat and because cwcheat is case sensitive it doesn't see your
   id. A lot of Games have ids like Slus_12345 so be carefull about the cases and it will work
   fine.
   Another reason can be that cwcheat can't read the id of your game because the developers
   used a strange way to store the executable or they used some other not standard way.
   if you see an incomplete id in the cwcheat screen for example a name, or someting else and
   not the id in this format XXXX_##### (eg SLUS_12345) most probably you have this problem
   if so go to the cwcheat menu and enable the dump function. then go back to game and press
   [] (square) then compress the MEMDUMP0.dmp you will find in the memorystick root and send
   it to me at this email: weltall (at) consoleworld (dot) org

Q: whathever i try to load cwcheat it's menu doesn't come up. what's wrong?

A: it seems that if you have a slow memory stick the plugin support can't load your prxs
   and cwcheat is more affected because it's a 100KB prx (so quite heavy).
   ATM lexar and datel memory stick/devices seems to be affected by this definitely
   and can't be used to load any prx. in any case a workaround to this can be flashing
   cwcheat to flash in the kn folder and modify the pspbtcnf_pops.txt file to load
   /kd/cwcheat.prx after $/kd/mediasync.prx
   (no kd here and kn above are right please don't change them or it won't work)

Q: i can't enable usb (it isn't even enabled in the cwcheat menu)

A: you are using the wrong prx remember to use the prxs with -USB in the end of their name
   and rename them as cwcheatpops.prx

Q: when i enable cwcheat my psx games goes more slowly or have strange noises. it's a bug of cwcheat?

A: no it isn't as cwcheat has a really low priority (lower than most prxs you will find out there)
   the problem here is a misconfiguration of cwcheat. if you open the menu you will see cpu and bus
   frequence they are most probably set at low mhz. to fix this i'd suggest putting them to 0 as Dark Alex
   suggested this will disable ANY cwcheat frequence management and it will be left to the sony psx emulator
   which has a dynamic overclocking and doesn't require user intervent.
   if you still want to manage by yourself the clock you can set these numbers above than you see (i'd suggest
   at least 266/133 or 333/166)
   when you have done this go to setting menu and save settings as default so this will be definitely fixed

Q: Remapsp doesn't work in pops mode and it locks my controller: i've also tried
   loading a remap file but still it didn't work or does work strangely only in some part of games. how can i fix this?

A: I'm sorry but at the moment there isn't a fix remapsp is not working in pops mode and it's a known problem
   so if you can't get a game to work with it, it isn't necessary to report this :)

Q: what's the format of the memory card which cwcheat loads and saves?

A: it's the mcr format (it seems similar or even equal to mc format) and it's the format used by emulators 
   like epsxe and Psx

Q: how i can load my psx/ps1 memory cards without a ps2?

A: you need to use a cheat device for psx like the AR/GS with the CAETLA firmware
   or a dexdrive which can be used directly with the pc and then an app like psxgameedit

Q: I have a memory card in another format. what do i do?

A: you have to convert it to mcr format to do this use applications like psx game edit or psx mem tool
   Be carefull to select the mcr format else they could output another format and it wont work

Q: i have a ps2 how do i upload download saves from my psx memory cards?

A: first of all you need a modded ps2 or another way to load homebrew application.
   when you have this you can get ulanchelf to download/upload your saves and Psx Raw Converter
   to download files from the psx memory card you can use lan or usb mass support (you can use the psp with it)
   then you need to psx raw convert to convert your save as mcs and you can then inport it in your favourite
   memory card management tool. then finally save the memory card as mcr and load it with cwcheat.
   if you want to do the reverse open the mcr memory card with your favourite memory card editor and export it
   as mcs and  use psx raw converter to make it a raw save and finally load it in a psx memory card with ulanchelf
   if you need more information have a look at the included readme with psx raw converter and enjoy :)

Q: how can i contact you?

A: you can contact me with this email adress: weltall (at) consoleworld (dot) com